Two GreenPlanet DVDC units installed together on a plant-room wall

Whale Shark DVDC

Where Every Unit
Tells a Story.

A visual journey through our installations across Malaysia.

Built by our engineers, installed by our team and measured on site.

Built here. Installed here. Measured here.

Built here. Installed here. Measured here.

  • 50+

    Sites installed

  • 15+

    Years of expertise

  • 30 – 50%

    Typical energy savings

    subject to application and operating conditions

  • SIRIM

    Independently tested

    by SIRIM QAS International

Chapter 01

Built With Precision.

Every Whale Shark DVDC unit is engineered, wired and tested by our own team before it ever reaches your facility.

Assembly happens in our Kuala Lumpur workshop. Wiring is done by certified engineers, and every component is bench-tested before the unit is closed and shipped — nothing arrives on site untested.

Designing and manufacturing in Malaysia keeps the engineering team, the spare parts and the service response in the same country as the installed base.

  • Precision wiring by certified engineers
  • Every component tested before shipment
  • Designed and manufactured in Malaysia
Agile Strategies engineer wiring a DVDC control panel in the Kuala Lumpur workshop

Chapter 02

Digital Variable Drive Gen 7

Adaptive drive control, Malaysian-made and independently tested by SIRIM QAS International.

The Blue Series runs one control logic in two enclosures — a 24 hour rated cabinet for continuously running plant, and a compact field ready unit for smaller circuits. Only the enclosure changes.

  • 24 hour rated for large AHU and chilled water circuits
  • Compact enclosure for smaller pump and ventilation circuits
  • Independently tested by SIRIM QAS International
Digital Variable Drive Gen 7 in the 24 hour rated cabinet

Image 1 of 2: Digital Variable Drive Gen 7 in the 24 hour rated cabinet

Technician wiring protection and control components inside an electrical cabinet

Inside the DVDC

Engineering You Can See.

Open the cabinet and every component is identifiable, serviceable and specified for the duty it carries.

The drive stage is a Siemens AC digital drive with harmonic filtration. Control sits on a dual-core DSP running the adaptive control algorithm, which processes six sensor streams and re-regulates motor speed in under 500 milliseconds.

Protection, data output and fault recovery are built into the same enclosure, so the unit does not depend on a separate panel to stay safe or to report.

  • Siemens AC digital drive with harmonic filtration
  • Dual-core DSP running the adaptive control algorithm — six sensor streams, sub-500 ms response
  • Overload, surge, short-circuit and phase-imbalance protection
  • RS232 / RS485 output to BMS, SCADA and remote IoT dashboards
  • Automatic fault detection and recovery in under 20 seconds

In the Field

Fifty-Plus Plant Rooms Across Malaysia.

Hotels, malls, airports, hospitals and utilities. Every photograph below is our own; customer and site names are withheld.

Multi-unit DVDC installation racked in a commercial plant room

Multi-site commercial installation

By Facility Type

Where the Units Went In.

A selection of installations, described by facility and equipment type.

Klemsan KLEA energy analyser recording kW, kWh and kVA on an installed circuit

Verification

Measured, Not Estimated.

Recorded results are read from energy meters on the circuit, before and after commissioning.

Consumption is logged with a Klemsan KLEA energy analyser or a Janitza UMG 96 RM energy meter installed on the circuit under test, before and after the drive is commissioned.

Comfort parameters are logged alongside energy, so a recorded saving can be checked against the conditions that were maintained.

  • Metering installed on the circuit before the baseline period
  • Same instrument, same circuit, before and after commissioning
  • Temperature logged alongside energy throughout

Measurement

The Instruments We Measure With

Recorded results are read from energy meters installed on the monitored circuits.

  • Klemsan KLEA energy analyser installed on a monitored circuit
    01Klemsan KLEAEnergy analyser installed on a monitored circuit
  • Janitza UMG 96 RM energy meter installed on a monitored circuit
    02Janitza UMG 96 RMEnergy meter installed on a monitored circuit

Independent Controlled Tests by SIRIM QAS International

  • 53.4%

    Energy reduction

    controlled test, 24 Nov – 7 Dec 2020, temperature held within ±0.4°C

  • 60.92%

    Lower daily HVAC energy use

    controlled test on an air handling unit, 10 – 26 Sep 2025

Controlled test results on specific equipment under test conditions. They are not the expected savings of every installation.

By Application

Typical Savings Potential by Application.

Typical energy-savings potential by HVAC equipment type.
ApplicationTypical savings potential
Air handling units
Cooling towers
Chilled and condenser water pumps
Ventilation systems

Typical ranges for suitable applications, not recorded results for a particular site. Savings at any facility depend on equipment condition, load profile and operating hours.

The Story Continues

Every Site Is Another Step Toward a Greener Malaysia.

Our performance figures, each stated with its context.

  • 30 – 50%

    Typical expected energy savings

    subject to application and operating conditions

  • Up to ~60%

    Recorded savings range

    based on selected installations

  • 53.4 – 60.9%

    Independent test results

    controlled tests by SIRIM QAS International

  • ~2 – 3 years

    Typical payback

    subject to site conditions and operating profile

Figures relate to HVAC motor applications such as air handling units, cooling towers, pumps and ventilation. Recorded results are presented as a general range without identifying customers, and some installations were pilot projects. Independent test results were obtained under controlled test conditions and do not represent the performance of every installation. Savings and payback at any facility depend on equipment type and condition, load profile, operating hours and electricity tariff.

Independently Tested and Made in Malaysia

  • Independently tested by SIRIM QAS International

  • Listed under MyHijau

  • MIDA green incentives, subject to eligibility

  • Made in Malaysia

Begin Your Story.

Tell us about your equipment and operating profile, and we will show you where the opportunity is.